Sunday, 30 July 2017


Sally in the Window
http://www.polkadoodles.co.uk/downloads-printables/download-collections/winnie-download-collections/winnie-special-moments/
Cut out a peace of Navy Blue card stock 12 x 5.8 inch's fold in half and crease, this will form your card.

I used this image from the special moments collection.  I coloured her with my derwent water coloured pencils.  I painted the bricks with my waterbrush.  Do not put water in your water brush, as it makes it very hard to control the colour.
Cut around your bricks by hand and make them have a rough edge.   

I cut out my butterfly's with my Stampin Up dies, their are plenty of butterfly punches around.  I decorated my butterfly s with bling and tiny pearls.  

I stuck four white satin roses on my card with sticky dots.  

I found these green buttons at Spotlight.  

I Stamped the words Birthday Wishes, I cut this out with my Scalloped oval punch and sponged around the edge with Gum Ball ink.  I cut another Scalloped Oval in plain green card stock.  I cut this along length ways and placed under my Birthday Wishes on either side to add colour and pop.  

I also added some bling flowers and placed them on the vines around the window.
Just have fun.     

Saturday, 29 July 2017

The Princess Shoe

https://www.etsy.com/au/listing/236309361/instant-download-digital-digi-stamps-big?ref=shop_home_active_3


Cut out a peace of 12 x 5.8 inch card stock and fold on half and crease.  Then cut a peace of decorative card stock in polka dots to fit on the front of your card, allowing to see the blue card under neath to give the card pop.  13.5cm by 14.8cm adjust if needed this is the polka dot card stock.
Do not stick down. 

 Stick a peace of whit lace 4cm up from bottom of your decorative card stock.  I used red tape for this as its stronger.  Then place a row of ribbon of your choice on top of your lace and fold under the decorative card stock.  The corner ribbon is 4cm down and 4cm across on each top corner in the same ribbon fold under the edges on your decorative card stock.

  The Ribbon roses I found at Spot Light.  Stick your spotted card stock to your card then decorate it. 

I  used a Besti Image for my card, I coloured her with my Derwent water coloured pencils.  I then cut out my image with my nesting dies.  I then sponged around edge with real red stampin up ink.  

I placed a large rose on each corner ribbon peace.  I put three little roses on the bottom of my card on each side of my image.  I put three bling butterfly's  on my image from Shiploads.  I cut out a scalloped Birthday wishes with my small oval Stampin up punch.  I sponged around edge with real red ink.  I cut a scalloped  red oval with  card stock. Then stick your Birthday Wishes on your card.  

Just have fun.  

Thursday, 13 July 2017

Dog Days Card

 
http://www.polkadoodles.co.uk/horace-boo-big-kahuna-download-printable-craft-bundle/

This is a Polkadoodle image, I coloured with my Derwent Water coloured pencils.    I cut a peace of plain card stock 12 x 5.8 inch's and then fold in half and crease in middle to form the card.  Then cut a peace of decorative card stock to fit on front of card.  Allow to see the coloured card stock under your card.

 I choose a peace of cat paper to put on my card.

I decorated my card with Dog stickers from the craft shop.  I put a paw border on my card.  I cut out my image, with my nesting die and sponged around the edge with real red ink from Stampin up.

I then cut a Scalloped printed peace of card stock with my punches, and I cut an Oval with my oval punch and I stamped Birthday wishes on the Oval before I cut it out.  Sponge around the edge with real red ink.

Just have fun.

Saturday, 8 July 2017


Love you always. 

http://www.mybestiesshop.com/store/p3249/NEW_%22Fluffy_Besties_TM%22INSTANT_DOWMLOAD_Digital_Digi_Stamps_Big_Eye_Big_Head_Dolls_Digi_Img018_New_Fluffy_Besties_Tm_Meet_Fluffy__Cafe_By_Sherri_Baldy.html

I cut a peace of plain hot pink card stock 12 inch by 5.8 inch's.  Then I cut three strips of decorative card stock in a printed card stock.  I chose Polka dots and words.  5cm by 15.5cm you over lap them a fraction allow to see your hot pink card stock underneath.  Do not stick to your card until you have put your zig zag ribbon on your card as you tuck the ends under your card stock.  

Colour your Besti Image and cut out with your large scalloped circle.  Sponge around edge with Pink Mambo ink.  I used a Kasercraft Packet of tea party embellishments this is were I found the T - Pot and the Coffee cup, the roses and the Love you always sign.  I stamped Birthday Wishes and cut out with my oval punch.  I cut out a pink Scalloped edge plain card scallop shape to put my Birthday wishes on.  I used Melon Mambo ink.  I used a satin rose in hot pink from Spotlight.  Just have fun.  

Friday, 19 May 2017

Tulip my Friend Card

http://www.polkadoodles.co.uk/the-darling-http://www.polkadoodles.co.uk/tulip-the-darling-buds-digital-craft-digi-stamp-download/buds-big-bundle-digital-craft-digi-stamp-downloads/
You get great Specials on Tuesdays.

Cut out a peace of white card stock 23cm by 17.5cm, and then fold in half to form your card.

Then cut a peace of plain card stock in pink, 17cm by 11.3cm the second layer is a peace of white card stock, 16.5cm by 10.5cm,   Once you have cut your first white peace that goes on top of your pink card stock, you must stamp the back of your white card using pretty in pink ink using a word background stamp and a scroll stamp.  You can use any stamps  you like then sponge around the edge with pretty of pink ink. Do not stick any of your Layers to your main card until we have finished making your four layers on your card and have put your ribbon on the top corner of your card, as you need to tuck your ribbon under your card so that you secure the ends.

Layer three is 11.5cm which is Pink Plain Card Stock.  Your fourth Layer is the layer with your image on it.  11cm by 8cm I used my word stamp and I stamped a little around my image, and sponged around my fourth layer with Pretty in Pink ink.  I stamped My Friend on the Front of my card.

I put a peace of ribbon on top corner of my  as shown in my card.  I then tied another peace of ribbon over top of my ribbon and trimmed, you only need to secure ribbon under each end of the card. Once you have all this done, you can then attach all your four layers to your main card.  Just have fun.

My image is from Polkadoodle and is coloured in with my Derwent water coloured Pencils, I have added some shimmer with my Wink of Stella Pen.  
Hyacinth 



http://www.polkadoodles.co.uk/hyacinth-the-darling-buds-digital-craft-digi-stamp-download/
http://www.polkadoodles.co.uk/the-darling-buds-big-bundle-digital-craft-digi-stamp-downloads/  You can get specials on Tuesdays and it is best to buy the whole collection as its better value for your money.

This is one of the Flower images from Pokadoodle, she is one of the Darling  Buds.
Cut a peace of White Card stock 12 x 5.8"  Then cut a peace of Navy blue plain card stock to fit on the front of your card allow to see the white card stock under your blue card.

Then cut a peace of yellow polka dot card stock to fit on the front of your blue card stock.  this peace of card is 14cm by 14cm adjust if needed.  
 
I then cut out two corner triangle dies and glued to the top and bottom of  my card. I then cut out a peace of lace and place at 41/2 cm up on my card.

  I used my nesting die to cut out my image.  I coloured my Polkadoodle image with my Derwent Water Coloured pencils, I sponged around my cut out image with Night of Navy ink, from Stampin up.  I used two punches my Oval punch and my Oval scalloped punch.  I stamped Birthday wishes with my Stampin up stamps.  I sponged around my Birthday wishes with Night of Navy ink.  I decorated my card with two buttons, a T- pot Button and a Plain Blue Heart Button.  Just have fun.
Sailor Girl Norma



Cut a peace of Navy Blue Card stock out 12 x 5.8 inches, and fold in half and crease to form your card.  I then found a peace of stripped decorative card stock and I cut to fit on the front of my card.   Before sticking your stripped decorative Card Stock to my card, I placed a peace of red and white stripped Ribbon on my card between 2.5" and 3"mark fold edges of ribbon under edges of decorative card stock and then stick to your main card.  

 I coloured my image with my Derwent  Coloured Water coloured pencils and then cut her out with one of my Nesting Dies.  Firstly using Night of Navy ink I sponged around my cut out image.  I then cut out an Anchor with my red card stock.  I decorated my card with a blue Anchor button and other nautical buttons, just have fun.